Updated Nov 19, 2026· 5 min read

Key takeaways

  • The SACATR Bow Maker is a double-sided hardwood tool with 12 pins for gift bows, wreath bows and garland balls. See its sizes, specs and best uses.

The SACATR Bow Maker is a double-sided bow making board built from natural solid hardwood. One side of the base is drilled for classic looped bows, while the reverse side is laid out for round festival garland balls, so a single compact tool covers most of the ribbon work that shows up in holiday decorating, gift wrapping and party prep. Twelve removable pin rods slot into the base, and moving the pins between holes is what sets the size of each bow.

This review looks at what the tool actually offers on paper: the confirmed dimensions, the bow sizes each side can produce, the ribbon limits, and the kinds of projects it is built for. It covers the gaps in the published information, because the listing leaves a few details unstated, and it explains the situations where a different style of bow maker would be a better match.

As an Amazon Associate, we earn from qualifying purchases.

Quick Answer

The SACATR Bow Maker is a double-sided hardwood board with 12 removable pins. The front side makes bows from 2.3 to 8 inches wide, and the back forms garland flower balls up to a 4.5 inch radius using ribbon up to 3.5 inches wide. It suits wreath makers, gift wrappers and party decorators who want even, repeatable loops without tying bows freehand.

Key Specs

Feature Detail
Brand SACATR
Product type Double-sided wooden bow maker tool
Material Hardwood (natural solid wood)
Base size Approximately 9 x 3.54 x 0.6 inches
Pins included 12 pin rods
Pin length Approximately 3.9 inches
Holes 11 on the front, 14 on the back
Hole spacing Approximately 0.9 inches
Hole depth Approximately 0.4 inches
Bow width range (front) 2.3 to 8 inches
Garland side (back) Flower balls up to 4.5 inches radius
Maximum ribbon width (back) 3.5 inches
Package contents 1 base and 12 pin rods
Instructions Steps shown in the product page pictures and on the box; a paper manual is not included with every batch, and the seller offers an electronic version on request
Item weight not stated
Model number not stated

Check price on Amazon

Who It’s For

This tool is a good fit for wreath makers who decorate season after season and want a wreath bow that comes out the same size every time. Because the pins hold the ribbon while the loops are formed, the finished bow keeps a consistent width instead of depending on how evenly someone can fold ribbon by hand. The 2.3 to 8 inch bow range on the front covers the sizes most often used on door wreaths, lantern swags and mailbox bows.

It also suits people who wrap a lot of gifts, since the same pin spacing can be reused to turn out matching bows for a whole set of packages. Party decorators can use it for chair bows, favor boxes and table accents, and the listing names hair bows and corsages among its intended uses as well. The back side adds a second job: round garland flower balls up to a 4.5 inch radius, which are used on Christmas garlands, trees and party backdrops. Beginners are part of the target audience too, because the working steps are printed on the box and shown in the product pictures, and the pins can be twisted slightly while pushing them in the first time they are seated.

Some buyers should skip it. Anyone who regularly makes oversized statement bows wider than 8 inches will find the front side too small. Crafters who work mostly with very wide ribbon should note the 3.5 inch ribbon limit on the garland side. People who want a spool holder, a built-in ribbon cutter or a plastic loom with printed measurements will not find those extras here, since this is a plain hardwood board and pins. It is also more tool than a person needs for a single bow once a year.

How It Compares

Against tying bows freehand, a pin board like this one trades a little setup time for consistency. Freehand bows cost nothing and need no storage space, but loop sizes drift from one bow to the next, and wide or slippery ribbon is hard to hold in shape. The SACATR board holds the ribbon under tension while the bow is built, which is the main reason crafters buy this style of tool.

Compared with single-sided wooden bow boards, the double-sided layout is the difference worth noting. A single-sided board only makes looped bows, while this one adds the garland ball layout on the back, so it replaces two separate jigs for holiday work. Compared with plastic bow looms, the hardwood base is heavier and more stable on a table, and the pins pull out so the whole kit stores flat in a drawer; plastic looms are often lighter and sometimes add measurement markings, which this board does not publish. Larger workshop bow makers handle wider ribbon and bigger bows, but they take up far more room than a base that measures roughly 9 by 3.54 inches.

FAQ

What size bows can the SACATR Bow Maker make?

On the front side, the adjustable pins produce bows from 2.3 to 8 inches wide, depending on which holes are used. The hole spacing of about 0.9 inches is what steps the size up or down. That range covers most gift bows, hair bows, corsages and standard wreath bows.

What is the back side of the board used for?

The back side has 14 holes arranged for making round festival garland flower balls rather than looped bows. The listing gives a maximum radius of 4.5 inches for those balls and a maximum ribbon width of 3.5 inches on that side. These balls are typically added to garlands, Christmas trees and party decorations.

Does it come with ribbon or a paper manual?

No ribbon is listed in the package contents, which are one base and 12 pin rods, so ribbon needs to be supplied separately. A paper manual is not included with every batch according to the seller, who offers an electronic version on request; the basic steps are also printed on the box and shown in the product page pictures.

Can beginners use this bow maker?

Yes, it is presented as a beginner-friendly tool. The pins twist slightly as they are pushed into the holes the first time, the ribbon is wrapped around the pins to form loops, and the steps are illustrated rather than left to guesswork. Starting with a mid-size bow on the front side is the simplest way to learn the pin layout.

Final Verdict

The SACATR Bow Maker is a straightforward, well-defined tool: a hardwood base, 12 pins, bows from 2.3 to 8 inches on one side and garland balls up to a 4.5 inch radius on the other. For wreath makers, frequent gift wrappers and party decorators, that covers most bow work in a kit that stores flat and needs no power, parts or upkeep. Buyers who need very large bows, very wide ribbon throughout, or printed measuring guides should look at a larger or more specialized bow maker instead. For everyone else, the published specs describe a simple board that does exactly the two jobs it promises.

A
affadmin
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
SACATR Bow Maker Review: Wooden Tool for Wreath…Check price on Amazon

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free
Amazon Business

A free business account with business pricing and bulk-buying tools for work, shop or home office.

Create a business account

As an Amazon Associate we earn from qualifying purchases.